The AP-4340 4-channel class AB amplifier can be used in three modes: 4, 3 or 2-channel.In 4-channel mode, its CEA power of 4 x 70W RMS will allow you to get the most from your Auditor kits installed up front and in the rear. The 3-channel mode enables you connect a kit to channels one and two, as well as an Auditor subwoofer to channels three and f..

The FPX 1.1000 is a very compact mono amplifier with a power of 420 Watts RMS at 4 Ohms. Specially designed for powering a subwoofer, this amplifier combines very high power and some great features. It is equipped with a complete range of settings for adjusting low-frequency sensitivity, a remote control and output lines, this amplifier is capable ..

The FPX 2.750 is a very compact 2-channel amplifier with a power of 2x220 Watts RMS at 4 Ohms. Thanks to its 2-/1-channel mode, its stability at 2 Ohms, the numerous settings and the output lines, the FPX 2.750 is an extremely versatile solution. Its very high power makes it just as ideal for multi-channel systems as it is for powering a subwoofer...

The FPX 4.400 is a very compact 4-channel amplifier with a power of 4x70 Watts RMS at 4 Ohms. Offering a 4-/3-/2-channel mode, stable at 2 Ohms and equipped with an active crossover for each pair of channels, the FPX 4.400 is the most “sound quality” model in this range. Thanks to its very comfortable power, this is the ideal amplifier for powering..

The FPX 4.800 is a very compact 4-channel amplifier with a power of 4x120 Watts RMS at 4 Ohms. Offering a 4-/3-/2-channel mode, stable at 2 Ohms and equipped with an active crossover for each pair of channels, the FPX 4.800 is the most versatile model in this range. The 2-/4-channel input modes ensure compatibility with head units only equipped wit..

5-channel FPX 5.1200 amplifier has a maximum power of 4 x 120 Watt + 1 x 720 Watt at 2 Ohms! The input selector duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs. To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crosso..

Head unit amplifiers soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficu..

The Punch P1000X2 is a 2-channel stereo amplifier capable of producing 500 Watts into each channel at 2-Ohms.It has full range of component system which includes several subwoofers. With its massive output stage, this amplifier is best suited for driving a pair of 8-ohm SVC subwoofers or four 2-ohm DVC subwoofers. Features High level input capa..

The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system.It has full range of component system which includes several subwoofers.It is well known world-wide for brute power, this amplifier offers a higher level of efficiency along with a tri-stage protection th..

The P300X2 Is a 2-channel stereo amplifier with a power of 150 Watts into each channel at 2-Ohms. SThe P300X2 amplifier is great with full-range or component systems and can be bridged for use with smaller subwoofers. It is equipped with a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo..

The Punch P400X4 is a 4-channel amplifier producing 100 Watts into all four channels at 2-Ohms.It is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.It is an excellent amplifier choice for virtually any vehicle. amplifier is great. The amplifier can also be run in stereo/mono mode si..

The Punch P500X2 is a 2-channel stereo amplifier capable of producing 250 Watts into each channel at 2-Ohms. The P500X2 amplifier is great with full-range or component systems with several subwoofers. It is equipped with a pair of coaxial speakers, component speakers, or a single subwoofer. Features High level input capable with Auto Turn-On ci..

The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. It is perfect for a 4-way full-range system having a front stage with subwoofers. This amplifier is multi-channel amplifier is versatile to power any audio system configuration. One can bridge both channels to create a high power 2-channel amp, or run st..

The PBR300X1 is a mono amplifier designed for a subwoofer system that requires little space.The Boosted Rail Technology is an ultra efficient design that doesn't even use a switching power supply to generate its 300 Watts of power. The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. Features ..

The PBR300X2 is a mono amplifier designed for a subwoofer system that requires little space.The Boosted Rail Technology is an ultra efficient design that doesn't even use a switching power supply to generate its 300 Watts of power. The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. This amplifi..